| |
| 1 |
4-Post Head and Twin-Beam Cutting Deck – The
same flat-cutting head design that's at the heart of every TimberKing mill. With two full-length steel box beams, the
1600's cutting deck offers 200% of the support of single-beam mills. |
| 2 |
Basic Hydraulics –
Blade feed and blade up/down operate with fingertip
hydraulic controls. Other brands cost about the same, yet come with no hydraulics! |
| 3 |
Available Hydraulic Log Loaders –
The 1600 is the only mill in its class to offer this
important labor-saver, usually available only on bigger, industrial mills. |
| 4 |
Electric Blade Clutch –
Flip of a switch engages and disengages blade. This
feature comes standard — costs hundreds extra on other brands, if it's available at all! |
| 5 |
Stationary Command Post & Direct Drive Hydraulics –
Standard hydraulics and electric blade cluth mean you stand in one place
to operate mill. No need to walk with cutting head. Hydraulic controls are direct-drive for smooth, variable control...eliminates
jerky on/off found with electric-control hydraulics. |
| 6 |
36" Capacity, 32" Cutting Throat –
1600 features the widest cutting throat of any major
manufacturer's mid-size mill. It will cut straight through the center of a 32" diameter log and will handle
logs up to 36" in diameter. |
| 7 |
Hinged Blade Covers –
Blade changes are a snap with the 1600's convenient
hinged covers. |
| 8 |
Baked-on Powder-Coat Finish –
A mill is only as rugged as its paint job. Compare TimberKing's baked-on,
UV-protected finish to sprayed-on water-based finishes found on other brands. |
| 9 |
Protected Hydraulic Lines
are tucked safely into industrial-grade energy chain...eliminates
pinch-point wear and tree-branch abrasion common with over-head hydraulic lines. |
| 10 |
Longest and Strongest Guarantee and Warranties –
We're so confident in the rugged construction of
the 1600 mill we back it up with TimberKing's exclusive 30-Day Money-Back Guarantee, 2-Year Limited Warranty,
and 5-Year Limited Cutting-Deck Warranty. |
|
AMERICA’S
FIRST & ONLY MID-SIZED MILL WITH BASIC HYDRAULICS!
Perfect
balance of value, speed, and convenience!
The TimberKing 1600 is a VALUE BREAKTHROUGH: the ONLY mill in its
class to offer hydraulic Blade Feed, hydraulic Blade Up/Down and available
hydraulic Log Loader. Compare to similarly-priced brands with hand-crank
feed, hand-crank blade up/down and manual log-loading and you’ll
see for yourself the TimberKing Value Advantage.
Not only do you take a big step up with these key hydraulics —
the 1600’s features give you serious strength and stability
that has made TimberKing the top choice of sawyers since 1929: 4-Post
Cutting Head, fully-welded all-steel deck, standard transport package,
best warranty in the business, and much more.
|
• Massive 4-Post Head Design! You get the same stable, flat-cutting
system used on TimberKing’s larger, industrial-duty mills. No half-measures
or cantilevers involved.
• 20 HP Kohler Motor muscles through logs up to 36” in diameter and
17’ long.
• Remote Electric Clutch prolongs blade life.
• Transport Package comes standard, includes 5,000 lb capacity axle,
16” highway tires, electric brakes, safety break-away harness, tongue,
receiver and lights.
• Hinged Blade Covers make blade changes fast and easy.
• Cadmium
Plating System prevents bare-metal parts from rusting.
• Fine Adjust Outriggers come with
transport package, provide rock-solid stability.
• Blade Tension Indicator gives you maximum cutting efficiency
and extended blade life.
• NEW! TimberKing DirectLube System applies TimberKing lubricants
in a thin film directly onto the blade. EXCLUSIVE gravity-feed system with
no motors or small parts to fail.
|
• Stationary
Command Post & Direct Drive Hydraulics –
Standard hydraulics and electric blade clutch mean you stand in one place to operate mill. No need to walk with cutting head.
Hydraulic controls are direct-drive for smooth, variable control...eliminates jerky on/off found with electrical-control
hydraulics.
• Hydraulic Blade Feed & Blade Up/Down eliminate extra work
of hand-crank systems.
• Optional Hydraulic Log Loader with twin 5000 pound rams easily lifts logs up to
4000 pounds. The 1600 is the only mill in its class to offer this crucial feature.
• Industrial Duty Energy Chain connects cutting head hydraulics
with log loaders.
• Mechanical Log Stops raise and lower from Command Post.
• Hair-Line Depth Gauge Scale allows precision cutting to
the 32nd of an inch!
|
 1600 Q&A:
Q: What makes
the 1600 my best choice in a Mid-Size mill?
A: The 1600 offers many more standard
features than the others in its class, including standard transport
package and 4-Post Head. The Value Advantage of the 1600 really comes
down to one word: HYDRAULICS.
No other mill in this price range offers the hydraulic automation available on
the 1600. Automatic blade feed and automatic blade up/down come standard. Compare
to other brands where hand cranks power these operations. And optional hydraulic
log loaders give the 1600 labor saving power that’s simply not available
on other brands.
Q: Why does the 1600 have hydraulics ONLY on loaders, blade feed, and blade controls?
A: Hydraulics save time and effort but cost
money. This is the mill for serious do-it-yourselfers: larger capacities and
more convenience than our smaller mill, without the higher prices of our fully-hydraulic,
pro sawyer mills.
Q: How do I know if the
1600
is the right mill for me?
A: If you have big plans but a tight budget,
the 1600 could be a good choice for you. Think about the logs you’ll cut:
the 1600 handles logs up to 17’ long by 36” diameter. Think about
volume: the 1600 turns out a much as 2,500 board feet per day. Think about ease-of-use:
the 1600’s key hydraulics make handling big logs easy. Finally, think about
value. No other brand offers so many features and so much automation at anywhere
near the 1600’s low price.
Q: Will the 1600 do
what I need it to?
A: Here are some ways
to make sure. Give us a call and we can tell you about the 1600 in detail. If
you wish, you can
see one in action: Chances are that there’s a 1600 operating somewhere
near you, no matter where you live. Give us a call and we’ll set you up
to contact the 1600 owner (or owner of any of our models) in your area. Finally,
try it for yourself. Every TK mill comes with our exclusive 30-Day Money Back
Guarantee. Try it for a full month in your woodlot. Not satisfied for any reason,
back it comes.
|
2400 | B-20 | 1600 | 1220
